- Contact 0870 350 7767
- |
- Advertise
NEW JIB CRANE REPLACES OLD ONE
News and PR from Linian Crane & Hoist Company - Published 29 September 2021
LINIAN were asked by a company who repair and service pumps to replace an aging and somewhat light weight jib crane SWL 250 kg with one of SWL 2,000 kg.To enable lifting and handling the extra capacity with relative ease and safety the slewing motion is electrically powered and controlled from the hoist pendant.
It was necessary for the jib arm to reach some areas but not foul obstructions in other areas so adjustable electrical limit switches were included to restrict the slewing angle where necessary.
Hoisting and beam travel are dual speed (normal and creep) for accurate load positioning.
The cable festoon power feed system runs in 'c' rail for smooth and tidy operation.
Another happy customer.
It was necessary for the jib arm to reach some areas but not foul obstructions in other areas
Other announcements from Linian Crane & Hoist Company
-
PROJECT - Four Overhead Cranes
Linian were asked by Stocks Sweepers Ltd, a rapidly expanding commercial vehicle manufacturer, to quote for four 2 tonne overhead cranes against a competitor who was offering reconditioned cranes.
29 Sep 2021
-
PROJECT - Retractable Lifting Beam
LINIAN were asked by a structural engineering consultant to come up with a means of lifting plant and equipment up to the plant room above the new Endoscopy Unit at York Teaching Hospital.
29 Sep 2021
-
Special Lifting Project – Domestic fitness suit
Dudden Construction Ltd was in the process of adding an extension to a cliff side property in Fowey, Cornwall...
26 Oct 2016
-
Special Overhead Crane Project
Linian Crane and Hoist Company were approached by Knowsley Engineering Services Ltd of Skelmersdale in Lancashire...
26 Oct 2016
-
Overhead Crane Refurbishment – From old to new
Linian Crane and Hoist Company were approached by Tratos UK Ltd...
26 Oct 2016
-
Two 3.2 tonne overhead cranes in a new hi-tech testing facility
Linian were asked by an aerospace company to quote for two 3.2 tonne overhead cranes in a new hi-tech testing facility. Headroom was critical as was maximising the floor coverage.
26 Oct 2016