- Contact 0870 350 7767
- |
- Advertise
2in1
News and PR from SCHURTER Ltd - Published 15 June 2021
In the case of mixed assembly of SMT and THT components on a printed circuit board, the questions are raised: two soldering processes?In contrast to conventional wired components for through-hole assembly (THT = Through Hole Technology), SMD components are fixed directly on the copper-laminated surface of the board by means of a solder paste and then soldered in a reflow process (similar to an oven). Often, the board is assembled on both sides, which doubles the possible assembly density. SMT technology is state of the art.
SMT technology is state of the art
Other announcements from SCHURTER Ltd
-
DKIV-1: High current choke in vertical design
SCHURTER expands the range of successful, current-compensated chokes with a series for 1-phase high-current applications on printed circuit boards.
15 Jun 2021
-
Commitment to sustainability
SCHURTER has long been committed to sustainability - under aspects that go far beyond healthy, long-term economic development and the careful treatment of the environment.
15 Jun 2021
-
SCHURTER at MEDI'NOV 2021
This year, the MEDI'NOV Connection takes place as a digital experience from 19-21 May - and SCHURTER will be there too!
15 Jun 2021
-
"Our knowledge is our strength"
SCHURTER: solutions for the highest hygiene requirements
15 Jun 2021
-
Logistics taken a step further
With the "Green Logistics by Galliker" funding association, the company is pursuing the goal of continuously reducing harmful effects on the environment and the consumption of non-renewable resources in its logistics processes.
15 Jun 2021
-
"Digital is technologically unlimited"
The "Grammy" is the "Oscar" of the music industry since 1959.
15 Jun 2021
-
SCHURTER at Electronica China in Shanghai
SCHURTER is participating in one of the key electronics show in China from 14-16 April 2021, at Electronica China in Shanghai.
20 Apr 2021
-
Input systems with antimicrobial surfaces - design for hygienic requirements
Input systems via touch are widely used in industry and medical technology as well as in the public sector to operate various devices.
20 Apr 2021
-
SCHURTER is pilot company for repetitive testing
Around 1500 people from seven companies volunteered to take part in preventive, repetitive COVID-19 testing as part of a pilot project.
20 Apr 2021
-
Financial statements of the SCHURTER Group 2020
A rather mixed 2019 and the certainty that the COVID 19 pandemic will spread globally, as well as a strong Swiss franc, did not bode well for 2020.
20 Apr 2021
-
TA36: Thermal circuit breaker with modern design
Improving a good product - this was the principle behind the development of the SCHURTER TA36 thermal circuit breaker.
01 Mar 2021
-
There's something in the air
With the electrification of the automotive industry, the ambition quickly arose to transfer this to aviation to the same extent.
01 Mar 2021
-
Rewireable IEC connectors for cable mounting
SCHURTER is expanding its portfolio of rewireable IEC connectors for 10 A with further colour variants of the types 4781 (C15, 120 °C) and 4782 (C13, 70 °C).
10 Feb 2021
-
Power Entry Module with extended mounting options
The proven SCHURTER power entry module DD11 consisting of an IEC appliance inlet (C14) with cord retention, fuse holder and mains switch is now available with a horizontal flange.
10 Feb 2021
-
New Managing Directors in 3 Group companies
With the beginning of the new year, three SCHURTER Group companies have experienced a change in management.
10 Feb 2021
-
Displays for HMI solutions
SCHURTER offers its customers complete HMI solutions with the right display to meet all desired requirements.
10 Feb 2021
-
IATF 16949: recertification audit 2020 passed
In August 2017 SCHURTER AG successfully passed the certification according to the Automotive Standard IATF 16949:2016 at the first attempt.
10 Feb 2021
