CRAWL TUBE & TUBULAR SLIDE FOR FORT SEA SPRAY IN NEW YORK

The slide came from a wooden platform at a sloped angle of 30 degrees. The slide had a diameter of 800mm and was 3M high. The slide then had a slope measuring 5.4M which came to an end with a 1.8M run-out. It was then complete with ground support tubes for a submerging fit and base plates which could be bolted to concrete depending on clients preference.

The crawl tube went across two platforms to introduce a unique way of travelling between the two points for the user. The crawl tube had an overall length of 2.97M with a 760mm diameter and it was fabricated from 2mm thick satin polished stainless-steel complete with 6mm thick end flanges.