- Contact 0870 350 7767
- |
- Advertise
PD Devices NEW FusionPro 4WS Surge Protected & RFI Filtered Socket Stri
News and PR from PD Devices Ltd - Published 22 May 2019
Superior Protection Against Electrical Surges Prevents damage to equipment caused by power spikes. Significantly Reduce Popping, Cracking Sounds, Reduce Electrical Interference & Improve Overall Sound1. Tired of those annoying pops and crackles you hear through your amp/speakers, ‘Noisy Electricity’ could be the culprit. EMI (Electromagnetic Interference) hardwired straight to your equipment from other devices (computers, cordless phones, dimmer switches, fluorescent lights, and refrigeration) on the same mains supply and RFI (Radio Frequency Interference – wireless interference from nearby electrical devices) are both contributors to unwanted sound through audio equipment.
The FusionPro 4WS filters EMI/RFI to significantly reduce unwanted mains noise.
2. And then thereÂ’s that hum... the most likely cause is a ground loop. Two pieces of equipment, linked (eg an amp and a keyboard) and plugged directly into the mains, can create their own circuit quite literally through the ground and the current which flows through that will cause noise interference.
By plugging all your linked equipment into the FusionPro 4WS, you reduce the likelihood of ground loops.
3. Safeguard your equipment. The FusionPro 4WS offers superior surge protection from overvoltage or power spikes caused by atmospheric conditions, power surges as a result of remedial maintenance by the provider or powering up or down of other equipment in the neighbourhood.
The FusionPro 4WS uses our own MOV (metal oxide varistor) technology, developed and manufactured here in the UK.
What a way to improve the quality of your Audio and Visual experiences, safeguard your equipment while improving performance
Other announcements from PD Devices Ltd
-
PD Devices Makes a Striking Difference in the Rail Network
PD Devices worked with Network Rail to design & make a product, which was installed in differing locations of the network & signalling, there was a reported reduction in failures of 33%.
25 Oct 2019
-
PD Devices's Network Rail Approved Products
PD Devices manufacture New Surge and Lightning Protection Devices in support of NR/L2/ELP/27410 for Network Rail. PD PADS approved RTM Series DSP1A/SSI/120, DSP1A-SSI-140 CRTM150/650
24 Oct 2019
-
Lightning Strike Causes Severe Damage at Yelverton Business Park
Lightning strike sent flames through Devon business causing thousands of pounds of damage, one company had their photocopier / printer & router completely fried, others lost a £4000 telephone exchange
24 Oct 2019
-
PD Devices Celebrates 55 Years of Manufacturing in the UK
As the ONLY UK Metal Oxide Varistor (MOV) manufacturer – and one of a very few in Europe, They offer a bespoke design service. Offering you ONLY the best quality in Surge and Lightning Protection
24 Oct 2019
-
Photovoltaic Solar Generator Systems need Surge Protection
Why all rooftop solar generators should be fitted with some kind of Surge and Lightning Protection
24 Oct 2019
-
CCTV is designed to protect you, how do you protect your CCTV?
CCTV or any kind of video surveillance is designed to protect you, but how do YOU protect your CCTV?
23 Oct 2019
-
PD Devices Provide Link Boxes for EDF Energy Dungeness B Nuclear Power Station
PD Devices supplied four new SVL Link Boxes which were used to replace four exiting SVLs protecting the 400kV cables of generator Circuit 21.
10 Oct 2019
-
PD Devices Gets "Fit For Nuclear"
We’re proud to announce that PD Devices has successfully completed its F4N journey for a second time and we have been re-granted Fit For Nuclear accreditation by NAMRC.
09 Oct 2019