Home > Siga Filtration > INJECTION MOULDING MACHINE COOLING WATER FILTERS

INJECTION MOULDING MACHINE COOLING WATER FILTERS

Siga Filtration News and PR from Siga Filtration - Published 14 November 2016 Cooling water is a critical processing component of injection moulding process. Siga Filtration can offer a range of products to remove scale and rust from recirculating cooling water.
Recirculating cooling water accumulates corrosion products from mould and piping, contaminants from seals, sediment from make up water and scale due to incorrect water treatment. These contaminants can cause uneven temperature on mould surface and block mould cooling channels and heat exchanger tubes. Insufficient temperature control during cooling cycle can result in inconsistent part dimensions, sink marks, poor surface finish and warped sections. Whether you are using an open circuit cooling water system or dedicated chillers, a correctly sized filtration system will ensure efficient heat transfer, reduce cycle times, reduce rejections and keep your moulds performing at optimum levels.

1FU Single cartridge filter housing features inline design, industrial grade stainless steel construction and threaded closure to withstand tough operating conditions. Find out more about 1FU single cartridge filter housing here or scroll down to see complete range of cooling water filters for injection moulding machines.

FWK Multi cartridge filter housings can be used for high flow rate filtration of cooling water in large mould shops. These can be installed on the main cooling water supply or dedicated chillers to suit unique requirements. Find out more about FWK Multi cartridge filter housings here or scroll down to see complete range of cooling water filters for injection moulding machines.

acuraMultiflow filter cartridges are designed for use with 1FU & FWK cartridge filter housings and provide efficient filtration down to as low as 1 micron. Polypropylene media is compatible with a wide range of cooling fluids. These cartridges are manufactured with high void volume for low clean pressure drop and long service life. Find out more about acuraMultiflow filter cartridges here or scroll down to see complete complete range of cooling water filters for injection moulding machines.

ALSI bag filter housings feature high flow rate cooling water filtration capability and a space saving design. Housings are manufactured from 304SS and come with a clamped closure as standard. These bag housings take industry standard size 3 & size 4 filter bags. Find out more about ALSI bag housings here or scroll down to see complete complete range of cooling water filters for injection moulding machines.

acuraBag Filter bags can be used with ALSI bag housings and are available in Polypropylene or Polyester. These filter bags are capable of handling high flow rates and suitable for applications with high dirt loads. Find out more about ALSI bag housings here or scroll down to see complete range of cooling water filters for injection moulding machines.

BFOS bag housings take size 1 or 2 filter bags and provide the highest flow rate capacity. These can also be combined with our magnetic assemblies to provide an effective solution for rust removal.
acuraMultiflow filter cartridges are designed for use with 1FU & FWK cartridge filter housings

Other announcements from Siga Filtration