SCHURTER starts with safety with Medical equipment
News and PR from SCHURTER Ltd - Published 05 February 2019
Electrical equipment used in medical technology must not place patients or medical staff in danger. electrical equipment. During normal operation
and in the event of a malfunction, it is imperative that the equipment does not pose any danger to patients or medical staff. A piece of equipment that causes a short circuit or residual current can trigger a protective system upstream and in doing so shut down other, possibly life sustaining, equipment.
Thus, it is necessary to pay special attention to how each unit is supplied with power. Connectors and power entry modules used in the equipment are tested to component standards and if in compliance with these standards can generally be used in most equipment without additional testing.
SCHURTER offers the V-Lock cord retaining solution, a simple, attractive and
alternative system to using brackets.
Other announcements from SCHURTER Ltd
-
TA36: Thermal circuit breaker with modern design
Improving a good product - this was the principle behind the development of the SCHURTER TA36 thermal circuit breaker.
01 Mar 2021
-
There's something in the air
With the electrification of the automotive industry, the ambition quickly arose to transfer this to aviation to the same extent.
01 Mar 2021
-
EMC measuring station at SCHURTER in Endingen (Germany)
Due to the COVID-19 pandemic and the associated travel restrictions, SCHURTER GmbH has set up its own EMC measuring station in order to be able to optimally support customers...
10 Feb 2021
-
Optical bonding of e-paper displays
Optical bonding enables the connection of touch sensor, cover glass and display into one unit by means of different technologies and processes.
10 Feb 2021
-
Rewireable IEC connectors for cable mounting
SCHURTER is expanding its portfolio of rewireable IEC connectors for 10 A with further colour variants of the types 4781 (C15, 120 °C) and 4782 (C13, 70 °C).
10 Feb 2021
-
Power Entry Module with extended mounting options
The proven SCHURTER power entry module DD11 consisting of an IEC appliance inlet (C14) with cord retention, fuse holder and mains switch is now available with a horizontal flange.
10 Feb 2021
-
New Managing Directors in 3 Group companies
With the beginning of the new year, three SCHURTER Group companies have experienced a change in management.
10 Feb 2021
-
Displays for HMI solutions
SCHURTER offers its customers complete HMI solutions with the right display to meet all desired requirements.
10 Feb 2021
-
IATF 16949: recertification audit 2020 passed
In August 2017 SCHURTER AG successfully passed the certification according to the Automotive Standard IATF 16949:2016 at the first attempt.
10 Feb 2021
-
Coexistence of AC and DC in the Data Center
The consistent use of direct current in a data center makes sense - loses can be massively reduced.
29 Aug 2019
-
DKIH-EVB: Evaluation boards for current-compensated high-current chokes
An EMI filter circuit for 1- or 3-phase systems can be set up and tested easily and quickly in an iterative process without having to make any adjustments to the layout of your own PCB.
22 Aug 2019
-
Thermal fuse RTS now also available with shunt
The RTS is a particularly compact overtemperature protection device for power semiconductors in SMD technology for highest demands.
11 Aug 2019
-
Series 4751: Ganged IEC appliance outlet Type F
With the series 4751 SCHURTER is introducing a new ganged IEC block style outlet, which provides an efficient solution for power distribution units and uninterruptible power supply units.
08 Aug 2019
-
Faster and faster, further and further
When it comes to presenting new electric vehicles, automobile manufacturers are constantly beating each other with increasingly shorter charging times and longer ranges.
05 Aug 2019
-
First 400 VDC coupler system according to IEC
SCHURTER launches the world's first UL approved IEC TS 62735-1 standardized DC coupler system designed to enable efficient DC power distribution strips and UPS.
05 Aug 2019
-
Services and Solutions for Photovoltaic Systems
Electromagnetic interference in photovoltaic systems
01 Mar 2019
-
Increased fire safety requirements for fuseholders
Impacts of the change in the IEC/EN 60127-6 standard
01 Mar 2019
-
Membrane Switches
Our engineers have the right technical knowledge to design tailor-made solutions. Because of their professional knowledge and experience, our engineering team will support you throughout your project.
05 Feb 2019
