- Contact 0870 350 7767
- |
- Advertise
Home > Vacucom Ltd > MGI Manifold | Vacuum Grippers
MGI Manifold | Vacuum Grippers
News and PR from Vacucom Ltd - Published 21 June 2016
Vacucom supply EOAT parts and with the range we supply customers are able to order parts only and then build their own grippers from the parts we supply.
Vacucom mainly supply parts as full working and tested grippers and manipulators, here is an example of a gripper we supplied to one of our customers who moulds automotive parts.
We were asked to design and build a gripper to handle a very thin manifold which was only 10mm diameter.
To handle the sprue, we introduced two single acting sprue grippers and due to the length of the sprue which needed to be granulated we needed to introduce a sprue cutter which proved very successful.
We were asked to design and build a gripper to handle a very thin manifold which was only 10mm diameter.
To handle the sprue, we introduced two single acting sprue grippers and due to the length of the sprue which needed to be granulated we needed to introduce a sprue cutter which proved very successful.
We were asked to design and build a gripper to handle a very thin manifold which was only 10mm diameter
Other announcements from Vacucom Ltd
-
-
Belljar | Vacuum Products
We were asked to come up with a simple yet effective solution for a large national company who manufactures cheese to enable them to take samples and check for air leakage on bagged produce.
21 Jun 2016