Greenlee Specialise in the Supply of Professional Grade Tools
We offer our national and international
customers trend-setting solutions with innovative products and
excellent service. Our basis for this is the long standing
partnership between Klauke & Greenlee, a world-wide
operating multi technology company. Together we have at our disposal
ultra-modern research and development centres in Germany and the
United States and an international distribution network with service
centres in more than fifty countries.
Operated manually of with a hydraulic
driver, Greenlee’s Sheet Metal Hole Punches range offers panel
builders and installation contractors neat and time saving solutions
for sheet metal and enclosures:
|Cable Installation Equipment|
Satisfying the demands of cable
installers and electrical contractors, Greenlee produces a
comprehensive range of installation equipment including Nylon,
Steel, Stainless and Fibreglass Fish-tapes, Cable stockings, Drum
Rollers, Swivels, Cable lubricants, to the portable "Ultra-Tugger"
|Bus Bar Processing Tools|
The Bus bar Tool Centre is perfect for
on-site or panel shop applications. Its compact nature makes it user
friendly for bending, cutting, punching and stepping copper bus bars
up to 120mm x 12mm. Coupled with a hydraulic power pack, this
bench-top bus bar work station provides for the needs of the panel
builder or switchgear producer.
Targeting the professional user,
Greenlee’s Test Instruments bring you safely through the day.
Designed by and for the professional electrician, Greenlee test
instruments are the new alternative.
|Monday||- 09:00 to 17:00|
|Tuesday||- 09:00 to 17:00|
|Wednesday||- 09:00 to 17:00|
|Thursday||- 09:00 to 17:00|
|Friday||- 09:00 to 16:00|
Rated 5 out of 3 reviews
Leave a review!
I can recommend the Greenlee Drill, Tap and Deburr bit set (50116304); it speeds up making a tapped hole in steel boxes/control panels by completing the whole process in one go. Pilot drilling is no longer required.
Since using the Greenlee LS50L-Flex, the battery hydraulic punch driver makes hole making in sheet metal panels faster and simpler especially in hard to reach places. I’ve also found that we save a lot of time compared to using holes saws (which we were using previously) as it doesn’t produce any swarf and there is no need to deburr the hole afterwards – it produces a clean & exact sized hole – Perfect!
When we started to use Greenlee hole punches, all the lads on the shop floor responded positively. There is a clear improvement in safety as there is no spinning blade, a massive reduction in workplace noise (the hole punch is nearly silent), and vibration is minimal; which is a hot topic these days with vibration white finger. The finished job is neater than our previous method, saves us time, keeps our workshop cleaner and our people safer.