Cutters, Bending Busbars, Punching & Metal Cutting Tools
have been supplying Alfra Tools and machinery for almost
20 years. Our Alfra range of equipment includes all
tooling for the construction of switchgear and control
panels. All our products are made to the highest
standards and approvals. Alfra products are used by many
many customers throughout the world and are renowned for
their unique quality.
Part of our range is:
- Tools that punch up to 21.5mm holes through busbar
thickness of 12mm - and cut through busbar up to 160 x
15mm. Further to our range we have hand punches for
steel along with free standing machines which can
accommodate sheet steel panels up to 2200 x 1030mm.
Steel - Stainless Steel - Aluminium and Plastic can also
be punched with the machines.
Other tools in
the range are: Din
Rail, Wiring Duct & Cable
Cutters - Crimping Tools - Hole Saws - Step & Mag
Drills - Deburring and Bevelling machines along with
The equipment is ready for
use and does actually not require any maintenance. Din
Rail Cutters should be screwed down well on a
table. Operation is by means of a lever. The fence
should be fixed with two set screws. The fence is used
to achieve an accurate length of the DIN-rail to be cut.
To view our full range of Metal Cutting Tools please click through to our website.
Alternatively if you have any questions pick up the
phone and contact us now.
Punching Tools -
The ALFRA hand hydraulic punchers are a sound hydraulic
system. Each penetration of particles from outside into
the system may cause larger damages. In order to
guarantee a faultless functioning and long lifetime,
Punching Tools must be kept clean at any time. Higher
temperatures and higher pressure may lead to increasing
gap leakage. Gap leakage is always existing on moving
and sealed parts because of their surface wetting.
Our range of tools can
bend busbar up to 160 x 12mm. We have 8 different types
of machines for Bending Busbars which gives our
customers a wide variety of choice including electronic
The image to the right is the LPV Busbar Bending
Machine. The LPV is a modification of our well-proven
device for processing conductor rails. The particular
feature of this unit lies in its very simple
construction but with the same performance
characteristics as the standard unit and the thereby
resulting especially good price / performance ratio.