- Contact 0870 350 7767
- |
- Advertise
Perimeter Machine Guarding - Blyth
News and PR from Billington Safety Systems Ltd - Published 22 July 2025
The Perimeter machine guarding or machine safety fencing was supplied and installed on a returning customer new site in Blyth in Northumberland. Click the pdf below to view the full news article:
Standard heights of the guarding is 1412mm, 1650mm, 2080mm & 2650mm
Other announcements from Billington Safety Systems Ltd
-
Locker Room Partitioning Telford
The single skin steel partitioning was installed in Telford to act as a Locker room / Changing room for warehouse operatives.
24 Nov 2025
-
Double Skin Partitioning Exeter
We used the double skin partitioning system to create a few different rooms for different uses within a customer new Warehouse.
24 Nov 2025
-
Bespoke Guarding Project London
This bespoke guarding project was installed onto a refurbished machine in London, the customer took off polycarbonate panels without a framework that were well used and covered in product spills.
24 Nov 2025
-
Weld Cell Enclosures Congleton
The project was a mixture of the double skin partitioning and the single skin all steel partitioning to create 5 individual sized welding areas for our customer.
24 Nov 2025
-
Safety Barriers Scotland
We have recently supplied a large number of mesh infill safety barriers for a project in Scotland, there was 3 different sizes of barriers and they will be angled to go around cable storage tables.
24 Nov 2025
-
Warehouse Store Manchester
The single skin all steel partitioning system was installed into an old warehouse facility in Irlam near Manchester.
24 Nov 2025
-
Guillotine Safety Guarding Derby
The Guillotine bespoke guarding project was installed to the rear of the Guillotine to replace the customers standard light curtains that they had.
24 Nov 2025
-
Double Skin & Mesh Partitioning Chesterfield
The particular project was again a combination of 2 different systems...
24 Nov 2025
-
Security Cages & Storage Cages
Supplied and installed an L shaped enclosure to create 2 security cages...
22 Oct 2025
-
Mesh Storage & Security Cages
We have recently supplied and installed a variety of mesh storage cages and security cages at a customers site on Biggin Hill Airport.
22 Jul 2025
-
Warehouse Office / Goods In Office
This Warehouse office was supplied and installed for the customers goods in Area where they can book in Deliveries and update their computer system.
22 Jul 2025
-
Storeroom Partitioning Wrexham
This Project in Wrexham was done using the single skin steel partitioning system, coming off an existing double skin partitioning system which we had installed previously on this customers site.
22 Jul 2025
-
Modular Cleanroom Partitioning
The Modular Cleanroom panels are supplied the same as the standard double skin partitioning panel system.
22 Jul 2025
-
Galvanised Outdoor Mesh Cage
The Galvanised Outdoor mesh cage has been designed and installed to go around 3 outdoor air-conditioning units that the customer didn’t want anyone getting close to.
22 Jul 2025
-
Cleanroom Parttiioning
The modular cleanroom partitioning system was installed to the underside of a suspended ceiling and to the concrete 1st floor of an existing customer site.
22 Jul 2025
-
Work Area Protection Partitioning
Cheshire Installation of work area protection partitioning
11 Jul 2025
-
Warehouse & Goods In Office Partitioning
Rotherham Installation of Warehouse & Goods In Office Partitioning
11 Jul 2025
-
-
Calibration & Measuring Room Partitioning
Nottingham installation of Calibration & Measuring Room Partitioning
11 Jul 2025