Oberlin Filter Ltd01325 317900
2 Hurworth Road, Aycliffe Business Park
Newton Aycliffe Durham
DL5 6UD 5
Marc Gouker-President, Sandray Precision Grinding, Inc
Sandray Precision Grinding, Inc has been in the grinding business for 50+ years and have used many different types of filtration systems. None better than the 450 gallon per minute filter purchased from Oberlin in 2013 that handles 15+ machines that produce a high volume of grinding sludge per day. The payback has been faster than we anticipated going from 3-4 employees constantly cleaning and moving sludge out of individual sumps down to 1 part time employee. After 2 years of continuous use two shifts per day we decided to pump and clean out the tank as a preventive maintenance measure. We planned for the worst and had an entire crew ready to de-mud and clean the tank and to our amazement there was very little grinding sludge in the tank and we probably could have gone 4 years. We have been very happy with both the Oberlin Filter and the Service they provide.
Oberlin Filter Ltd01325 317900
2 Hurworth Road, Aycliffe Business Park
Newton Aycliffe Durham
DL5 6UD 5
Bob Holt, Winbro Group Technologies
We were approached by Oberlin Filter ltd directly, off the back of their success within the Aerospace sector, during autumn 2013.
Their timing was good, Winbro were interested to establish a long term working relationship with a suitable coolant filtration supplier.
“Over a three week period during spring 2014 we were able to commit to our first order with Oberlin for a complete coolant filtration management system.
Compared to others I found Oberlin’s approach methodical, organised, open and honest.
They listened to our needs and requirements carefully, offered, and then delivered, a package, suitable on both technical and commercial terms.
More recently we have followed up with an order for a bigger centralised coolant filtration system.
We remain satisfied with Oberlin Filter Ltd and look forward to developing our business relationship further in years to come.