Environmental Test Chambers / Temperature Test Chambers
/ Humidity Test Chambers

Teslatest have specially selected a range of suppliers of test chambers, test systems and the unique Thermal Platforms plus Vibration systems who will enable us to provide a comprehensive range of test solutions to meet your requirements. We can offer solutions from simple Bench-top temperature chambers through all sizes of chambers to sophisticated PC controlled bespoke test systems, offering the full range of test conditions including Temperature, Humidity and Vibration chambers.

Temperature Test Chambers

We supply the excellent range of temperature test chambers manufactured by Binder GmbH, Germany; these chambers are supplied in a range of sizes of 53, 115, 240 &720 litres. They are fitted with a fully programmable controller with graphical display to enable the programming of a range of cycles; they are also fitted with an Ethernet port for connection to a remote PC. This can be used in conjunction with the APT-COM software for full chamber operation and programming including the data logging of the test functions and results.

The chambers are supplied with one interior shelves, an 80mm porthole for connection of external equipment and viewing window in the door. They can be supplied in temperature ranges of -40ºC to +180ºC or -70ºC to +180ºC with rates of change of up to 5.0ºC/min depending on chamber size.

Binder MK 115 Temperature Chamber 1

Humidity Test Chambers

Our ranges of humidity test chambers are similar to the temperature chambers and have the added components to generate and control the humidity levels. The range includes the excellent MKF chamber range from Binder GmbH which operates with a temperature range of -40ºC to +180ºC and humidity range of 10% to 98% RH over the range of +10ºC to +95ºC and the NEW MKFT 240 with a temperature range of -70°C to +180°C and humidity of 10% to 98%RH.

These are supplied in sizes of 115, 240, & 720 litres, and are fitted with a Rotronic Capacitive probe for accurate measurement and control of the Humidity. They are fitted with a de-mineralised water storage tank which can be manually filled or can be connected to a mains water de-mineraliser system for automatic filling, they can also be fitted with a water re-circulating system for minimal water usage.

Binder MKF 240 Humidity Chamber 1

Stability Chambers / Constant Climate Chambers

We also supply the a range of Stability or Constant Climate Chambers from Binder that provides a reduced operating ranges of -0ºC to +70ºC & 10% to 80%RH (KBF Series) or -10ºC to +100ºC & 10% to 90% RH (KMF Series), these are very stable chambers and provide excellent long-term humidity stability tests. These have the advantage that they operate from a standard 240V 13amp mains socket and use de-mineralised water via a de-mineraliser system or can be manually filled by the use of the external water tanks. They are fitted with a fully programmable controller with graphical display to enable the programming of a range of cycles; they are also fitted with an Ethernet port for connection to a remote PC. This can be used in conjunction with the APT-COM software for full chamber operation and programming including the data logging of the test functions and results.

They are supplied in sizes of 115, 240 & 720 litres and are fitted with 2 off shelves, a 50mm porthole and an internal glass door for viewing the contents without loss of set conditions.

Binder KMF 115 Constant Climate Chamber 1

Temperature Ovens for Testing, Drying and Curing

Teslatest Systems through its negotiated contract with Binder GmbH is able to supply a complete range of Temperature Ovens for component testing, drying and curing. These range in sizes from 23, 53, 115, 240, 400, & 720 litres with temperatures of 5ºC above ambient to +300ºC, and are supplied with a range of controller options from single set point control through to fully programmable control for cyclic setting of conditions. All the Ovens are fitted with 2 internal shelves and have controlled fresh air vents for the exhaust of excess fumes and heat.

All the ovens are fitted with an over temperature safety cut-off switch to Class 2 (DIN 12880), Plus many have the optional RS422 communications interface for use with the APT-COM software for connection to a PC for Oven control and data logging of the ovens performance.

Binder FED 53 Temperature Oven 1

Instrument Supplies & Vacuum Drying Ovens

We can also supply a Vacuum drying oven complete with vacuum pump for vacuum drying of components and compounds; these can be supplied in sizes of 23, 53 & 115 litres.

All our Chambers are supplied and delivered ready for connection and use, giving you the benefit of rapid installation; many just require connection to the power supply before being ready for use.

Teslatest will also supply your entire instrument requirements needed to compliment your test chambers and vibration system, including data logging systems, thermometers, hygrometers, and thermocouples. Plus all the relevant sensors and connections.

Teslatest through it's team of selected suppliers plus it's own team can also offer a complete maintenance and support service to maintain all your equipment in its optimum operational condition. These services include the repair and maintenance of your test systems plus the calibration of the systems performance to UKAS standards. We can also provide a complete equipment Refurbishment service on all your existing equipment to bring it upto date with new plant components including new control systems. The refurbishment service can be carried on your site or the equipment can be shipped to our factory for a full refurbishment service.

Contact Us Now For Your Free No Obligation Consultation on your Test Requirement Solutions

Contact us via phone or email with any questions