MacInnes Tooling Ltd, Metalworking Fluids, Cutting Fluid

MacInnes Tooling Ltd

Thistle House
Adelaide Street
Helensburgh
Dunbartonshire
G84 7DL

Telephone - Place mouse pointer where it says here to reveal telephone number

Telephone Number Requested For
MacInnes Tooling Ltd
01436 676 913

01436 678 877

www.macinnes.co.uk

MacInnes Metalworking Fluids

Are you looking for a new cutting fluid? MacCool MP could be all you need. MacCool MP compares very well with other metalworking fluids. It is a modern, long life coolant suitable for use on a wide range of materials from aluminium alloys through steels to aerospace alloys. It can be used on both manual and CNC machines and is perfect for high coolant pressure systems due it’s low foaming properties. MacCool MP is a semi translucent cutting fluid with a 50% oil content for good corrosion control. Maccool MP contains synthetic lubricity enhancers for excellent tool life and surface finishes. It is chlorine free, sulphur free, triazine biocide free and sodium nitrite free Despite these advantages MacCool MP is available at a quite competitive price in both 25 litre and 205 litre containers.

To compliment the MacCool MP we stock a high quality ISO 60 grade slide way lube oil - MacLube 68D

Hangsterfer’s Metalworking Fluids

Perhaps you machine aerospace components, maybe automotive, you need to know the coolant you use has approvals, has a reliable track record and is capable of producing your components to the high standard you require.

S500CF Hangsterfer’s best selling cutting fluid is S500CF. S500CF is approved by:- Rolls Royce plc - Boeing Aircraft Corporation - Bombardier Aerospace - Lockheed Martin. It is used throughout the world by Aerospace Manufacturers and sub-contractors who require a coolant capable of working with the difficult materials encountered in this industry. Tapping stainless steel on your machining centre? No need for an optional stop to apply tapping oil, S500CF will allow you to tap stainless without additional fluids. Reaming and fine boring as well as heavy milling are carried out with ease. Nickel and titanium alloys are not a problem. No need to worry about operator safety, S500CF is probably the safest coolant you can buy, there is no small print, no biocides just below the legal level for labeling. It is biocide free and has an LD50 figure over 15g/Kg

Neat cutting oils

cutting oils Our cutting fluid range includes MacOil 15, a 15 viscosity neat cutting oil for use on sliding head lathes and similar machines. MacOil 15 is a 15 viscosity oil which gives good penetration to the workzone and low dragout. MacOil 15 contains synthetic lubricity and cutting enhancers for good tool life and surface finish. MacOil 15 is a well priced product and offered in 205 litre drums. As well as oils for re-circulating we stock Hangsterfer’s 525 tapping oil. A Rolls Royce approved tapping oil that gives excellent results on stainless steel and other difficult aerospace alloys. Available from stock in a box of 5 x 500ml bottles and 19 litre Pails

Coolant Mixing valves

It is essential that water mix metalworking fluids are correctly mixed and a piston type valve is the most efficient and easiest way to do it. Concentration is simply adjusted form 2% to 10% by means of a rotary ring. The MiniDos 10 is a water driven valve for accurate mixing of cutting fluid concentrate into water. It features a separate mixing chamber which means the piston is not in contact with the chemical concentrate Mixing of the coolant is done in an accurate and consistent manner, which in turn leads to a longer sump life for your metalworking fluids

Coolant maintenance Equipment

Metalworking fluids have to contend with many contaminants, non more so than the cutting fluid commonly known as coolant. From the first day it is installed in the machine it is subjected to heat from the machining process, cuttings, metal fines, tramp oil, and attack from unwanted micro-organisms such as bacteria and fungus.

Coolant maintenance Equipment As a user you have two choices, the money pit method of cleaning out the machine and changing the cutting fluid every few months or you can maintain the cutting fluid by installing maintenance equipment. Accustrip manufacture several types of systems designed to treat metalworking fluids. These range from simple paper band filters, tramp oil removal systems and central coolant treatment plants. Installing an Accustrip central plant can increase in coolant life up to 5 years. Both tramp oil and fines removal is done automatically.

An Accustrip system leads to a dramatic reduction in coolant maintenance costs Utilising a space saving design they are 1/10 the size of conventional units which means a further reduction in costs as much less cutting fluid is required for your machine shop.

PRODUCTS AND SERVICES

Carbide Cutters
Carbide Cutting Tools
Carbide Tooling
Cutting Fluids
Lubricant And Oil Sales
Metalworking Lubricants
Solid Carbide Cutting Tools
Tapping Equipment
Twist Drills

[associations]

To view the results statistics for MacInnes Tooling Ltd click here

MacInnes Tooling Ltd - Metalworking Fluids, Cutting Fluid