West Yorkshire Steel Company Ltd
Established in 1975 as suppliers of special steel
grades to the manufacturing and engineering industries. West Yorkshire Steel Co
Ltd hold comprehensive stocks and supply throughout the U.K. As an ISO 9001
accredited supplier help is on hand for those hard to find steel
specifications, including British, European & International grades.
Popular standards include BS970, BS4659, EN10083, Werkstoff, DIN, ISO, AISI,
ASTM specifications. Our stock range includes tool, stainless and
duplex stainless steel, alloy and engineering, spring,
manganese steel plate, cast iron, high speed steel and tool bits, precision
ground bar, flame cut blanks.
We shall endeavour to identify your steel specification
requirement and offer either the exact grade or equivalent grade. If it is not available we will try to offer a near alternative specification. Please provide details of the specification and the sizes
and quantities required when enquiring with our sales team.
Our stock range includes tool steel grades, suitable for cold work, hot work,
and plastic mould applications, and high speed specifications. It
is stocked in a wide variety of shapes and sizes Ground tool products are
supplied such as Silver Steel and Ground Flat Stock. Grades M2 and M42 High
Speed tool bits are supplied in standard and non standard sizes.
high carbon steel supplied in precision ground bar form produced to
BS1407 specification. It is supplied in the annealed condition
having an average hardness of 270 brinell (Rockwell C27). To obtain full
wear resisting hardness with toughness it may be heat treated
up to a maximum hardness of Rockwell C64.
As a stockholder stocks are held in standard sizes in 3m,
2m, 1m, and 330mm lengths. Non standard sizes in silver steel can be
produced to your specific requirements.
Ground Flat Stock
(also known as
Gauge Plate) is supplied in grade BS4659 BO1 tool steel, Standard sizes
are stocked; We can also produce non standard
sizes. We can also produce Ground Flat Stock in alternative grades (eg
D2, D3, EN8) if required. Supplied fully annealed, the ground flat stock
is precision ground to close tolerances. Ground Flat Stock Metric sizes
are stocked in 500mm and 1000mm lengths. Ground Flat Stock Imperial
sizes are stocked in 18" and 36" lengths.
Available in the austenitic, precipitation hardening and martensitic varieties,
including specifications 17/4PH, FV520B, 440B & 440C. Duplex Stainless and
Super Duplex Stainless Steel plus the full range of 300 and 400 series grades.
is designed to combine improved resistance to stress corrosion cracking,
pitting, crevice corrosion and high strength when compared with other
stainless alloys. With its austenitic ferritic chromium, nickel,
molybdenum composition duplex alloy resists chloride
environments and sulphide stress corrosion. UNS S31803 is our most common duplex grade. Also
available is super duplex in grades UNS S32760 & UNS
& Alloy Steel
Comprehensive stocks are held in a wide range of carbon and alloy engineering
steel specifications. British Standard (BS970) and
available. Carbon, Alloy & Engineering Steel specifications can be
supplied in round bar, flat bar, plate and sheet.
This is stocked in a wide range of sizes. Carbon steel strip and
spring steel sheet is available most commonly in the hardened and tempered
condition, though sizes are available in the annealed condition. Round and flat
engineering grade bar is stocked in the as rolled
condition. Most specifications are held to British Standard
including BS1449 & BS970. Stock of spring temper rolled stainless is available, supplied in grade 301 stainless austenitic stainless steel.
They are also stocked in 420 martensitic stainless steel
High Manganese Steel Plate
11 to 14% manganese steel plate with excellent work hardening properties.
X120Mn12 is suitable for wear applications where high impact/gouging abrasion
leads to a work hardening effect. X120Mn12 manganese plate can be cut by
plasma or laser profiling. X120Mn12 high manganese is a non magnetic, work
hardening abrasion resistant engineering plate, supplied in full plates or
as cut pieces.
Stocks held in continuous cast iron bar, offering a finer grain structure and
graphite distribution than sand cast iron bar. We can supply cast iron round bar
in 3 metre lengths or as cut pieces. Square and flat bar can be supplied as cut
pieces to your required sizes. Cast Iron grades include BS2789 420/7 600/7,
BS1452 Grade 220, 250, 260, Mehanite, Grey Iron & Spheroidal Graphite SG Iron.
High Speed Steel Toolbits
Available in specifications BS4659 M2 and M42. Available in standard stock
sizes. Non standard sizes can be produced to suit your requirements.
Precision Ground Steel Bar
All grades (including tool, carbon, alloy, engineering,
stainless and duplex stainless steel) can be produced as ground bar to your
specific sizes and requirements.
Carbon grades including mild steel, EN8, EN9, EN43 can be supplied flame
cut and normalised.
A medium carbon engineering steel. It is supplied bright drawn in square and
flat bar, to tolerances as stipulated in BS46.
AISI steel specifications & SAE steel specifications
AISI & SAE grades are popular in the UK for their use in the oil and gas
industries. AISI & SAE steel specifications include stainless steel, carbon and
alloy engineering steel grades.
Werkstoff & DIN steel specifications
European steel specifications are most popular in Werkstoff steel and DIN
Quality – ISO 9001 certification
Our quality management system has been assessed and approved by many of our
customers and has been assessed and registered by ICS Registrars Ltd to ISO 9001
quality assurance standard,. Reassessment is ongoing to ensure the continuous
supply of quality products and a continued commitment to service and quality.
All products can be supplied with either a Certificate of Conformity,
Material Certificate or 3.1b Mill Certificate. Please provide details of your
required certification when placing any enquiries or orders.
BS4659 BO1 BD2 BD3 BH13 BS1 BM2 BA2 BM42 O1 1.2510 KE672 D2 1.2379
KEA180 D6 1.2436 1.2842 O2 D3 1.2080 KE970 H13 1.2344 KEA145 M2
1.3247 1.3343 S1 1.2542 KE960 1.2550 A2 1.2363 KEA162 P20 1.2311
1.2312 P20S 1.2738 2767 1.2767 KE355 HCNC IBD IP20ID1 ICW IMV T1 T4
M42 M35 KE896 BS1407 W1 W2 1.2833 EN42 EN45 EN47 Toolbits Flame Cut
Plate Key Steel BS ASTM AISI ESR BS EN ISO 4957 VPN Rockwell Brinell
17/4PH 17-4PH ASTM A564 Grade 630 Condition A H1150+H1150 H1150M
H900 UNS S17400 420S29 420S37 254SMO FV520B X42CR13 420S45 1.4021
1.4024 1.4028 1.4034 416S21 410S21 431S29 304 304L 303 304 316
316S31 321S31 310 F51 1.4462 S31803 F55 1.4501 S32760 AISI 440B 440C
A276 A182 31803 1.4057 1.40051.4112 32760 1.4006 3Cr12 1.4003 1.4845
1.4305 1.4306 1.4301 1.4404 EN58AN EN58 EN58E EN58J EN58AM EN56
EN56A EN56AM EN56B EN56C EN56D EN57 KE40A Custom 455 AMS 5643 254SMO
Titanium 6AL 4V Plasma Cut Aluminium Bronze CA104 A286 Non Ferrous
Brass Aluminium Copper 904L
BS970 EN43A EN43B EN43C EN1A 230M07 SMn28 1.07159 EN3 070M20 EN6
1.0402 C22 080M15 080A15 080M46 250A53 250A58 080M50 EN8 080M40
1.0511 080A42 1730 080M46 C40 C45 Key Steel BS46 BS4235 EN9 070M55
080A52 080A42 080A57 1.0535 C50 C55 EN14 EN32 080M15 1.0401 C15
EN10025 S275 C22E Flame Cut Lumsden Precision Ground BS4360 43A EN43
EN45 251A58 EN47 250A58 BS1449 CS70 CS80 CS100 CS95 1095 1050 1060
1070 Shim Hardened Tempered Annealed Cast Iron BS1452 Grade 250 260
17 420/12 BS2789 SG Grey 1.0507
AISI 4330 4330V BS970 655M13 722M24 905M39 735A50 605M36 EN19T
709M40 708M40 42CrMo4 AISI SAE 4130 4140 4145 1.7225 8620 8620H
EN24T 817M40 817M40T 150M19 EN26 EN26W EN26V 826M40 080M46 34CrNiMo6
835M30 4340 1.6582 KE805 EN30B 835M30 AISI 4140 AISI 6150
30NiCrMo16-6 1.6747 35NCD16 EN36 KE169 655M13 14NiCr14 SAE 8620
1.5752 KE169 EN40BT 722M24T 32CrMo12 1.7361 EN41B 905M31 905M39
41CrAlMo7 75CR1 EN19 EN24 10083 AISI 4130 904L Case Hardening Steel
Through Hardening Steel Nitriding Steel Die Steel
Our Website for more infomation