Our aim is to provide a cost effective solution to your fire
protection needs without compromising on the quality across North
Yorkshire and the UK, based in York but service across the UK in
areas such as Harrogate, Knaresborough, Ripon, Bridlington,
Scarborough, Newcastle, Manchester, Liverpool, Blackpool, Chester,
Exeter and Brighton etc
It is very important that your fire fighting equipment, like fire
extinguishers, Hose Reels, Ansul Systems, Dry Risers, sprinklers,
fire alarm systems maintenance is carried out regularly to the
correct British standard so that it will work when you need it. Many
people assume that fire extinguishers will work when they are used,
but unless there’s a proper programme of fire extinguisher
maintenance, this may not be the case. Not all fire companies are
the same, in fact some fall very short to the point your insurance
could be void!
You need to be sure that your fire
extinguishers are in good working order.
(Mouse over images to enlarge)
We specialise in providing Fire extinguisher maintenance, as well as
almost every other type of fire service, such as fire risk
assessments, basic fire awareness training, fire warden training,
etc Not only can we ensure that your fire extinguisher, fire alarm,
sprinklers, dry and wet risers, hose reels etc, maintenance is up to
date, we can also advice you on your staff fire training as well as
your fire Risk assessments.
We can advice you on the correct fire extinguisher cover for your
business, from offices to warehouses we keep you covered and your
insurance company happy.
Fire safety legislation (Fire Safety Order 2005) requires businesses
to have all portable fire fighting equipment serviced annually by a
competent person. However many so called extinguisher companies are
far from competent. The law requires you to ensure they are
competent.
We supply, commission to BS5306-3 2009 and follow the code of
practice, we install to BS5306-8 2000 using British Standard Kite
marked fire extinguishers. The simplest way to ensure competence is
to insist upon Fire Extinguishing Trades Association (FETA) trained
service personnel. (FETA Is not the only exam body). Ask for a copy
of the engineer’s certificate, if they say no or don’t have one then
take great care!
All our service engineers hold a FETA certificate in the servicing
and maintenance of portable fire-fighting equipment and re-sit the
exam every three years, to show they are competent maintaining a
high standard.
To meet the British Standard all new fire extinguishers must be
commissioned on site, with all the initial findings noted on the
service label. This cannot be done on a sale only basis, from the
internet or mail order, the commissioning engineer should be
competent (e.g. FETA approved).
We not only supply at very cost effective rates but also commission,
fit and maintain. We offer ongoing maintenance. Each year we
automatically remind you when your annual service is due and arrange
the subsequent service visit at a time suitable to you.
Call now for a competitive quotation for
all your extinguisher needs.
Site surveys are completely FREE and without obligation
It is a legal requirement to have extinguishers serviced and
maintained by a competent engineer and suitable fire protection is
an insurance requirement.
Within a UK business 'The Responsible Person' is tasked with not
only ensuring that fire extinguishers are serviced annually but also
that the servicing company are 'Competent'. The easiest way to
demonstrate competence is via third-party certification and in
particular to insist servicing personnel are F.E.T.A. approved.
We include as standard a certificate-of-inspection and a written
report stating the number and type of fire extinguishers along with
any recommendations or advice from the service engineer. |
